Al OH 3 chemical name is aluminum hydroxide. It is a white, gelatinous precipitate formed when aluminum salts react with bases. The compound has the molecular formula Al(OH)₃ and a molar mass of 78.00 g/mol.
Aluminum hydroxide forms when aluminum ions (Al³⁺) combine with hydroxide ions (OH⁻) in aqueous solution. This occurs during neutralization reactions, such as adding sodium hydroxide (NaOH) to aluminum sulfate (Al₂(SO₄)₃). The reaction produces a gel-like solid that settles out of solution.
The compound is amphoteric, meaning it can act as both an acid and a base. It dissolves in strong acids to form aluminum salts and in strong bases to yield aluminate ions (Al(OH)₄⁻). This dual behavior makes it useful in industrial and medical applications.
Al(OH)₃ consists of one aluminum ion bonded to three hydroxide groups. The aluminum atom sits at the center of a distorted octahedron formed by six oxygen atoms from neighboring hydroxides. In solid form, it adopts a layered structure with hydrogen bonding between layers.
Three distinct crystalline forms exist: gibbsite (γ-Al(OH)₃), bayerite (β-Al(OH)₃), and nordstrandite (α-Al(OH)₃). Gibbsite is the most stable and common form, found in bauxite ore. Bayerite forms under high-pressure conditions and is less thermodynamically stable.
Each form differs in density and surface area. Gibbsite has a density of 2.42 g/cm³ and a specific surface area of about 10-20 m²/g. These physical traits influence its performance in filtration and catalysis.
| Form | Crystal System | Stability | Common Use |
|---|---|---|---|
| Gibbsite | Trigonal | High | Bauxite processing, antacids |
| Bayerite | Orthorhombic | Moderate | Research, catalyst support |
| Nordstrandite | Monoclinic | Low | Rare, synthetic |
Aluminum hydroxide is used in pharmaceuticals as an antacid. It neutralizes excess stomach acid by reacting with HCl to form aluminum chloride and water. A single tablet contains 200-400 mg of Al(OH)₃ and reduces gastric acidity within 15 minutes.
In water treatment, it acts as a coagulant. When added to turbid water, it forms flocs that trap suspended particles. The process removes up to 95% of colloidal impurities. Municipal systems use 1-5 mg/L of Al(OH)₃ to clarify drinking water.
It serves as a precursor to alumina (Al₂O₃) in the Bayer process. Bauxite is digested in hot NaOH, producing sodium aluminate. After cooling and seeding, Al(OH)₃ precipitates. This step yields 90% pure alumina after calcination at 1100°C.
Al OH 3 chemical name is often confused with aluminum oxide (Al₂O₃), which is a different compound. Aluminum oxide is hard, refractory, and used in ceramics. Al(OH)₃ is soft, reactive, and water-soluble in extreme pH ranges.
Some assume Al(OH)₃ is toxic due to aluminum's presence. However, it is poorly absorbed in the gut. Studies show less than 0.1% of ingested aluminum is absorbed. The FDA classifies it as GRAS (Generally Recognized As Safe) for use in antacids.
A key distinction: Al(OH)₃ is not the same as aluminum sulfate (Al₂(SO₄)₃). The latter is used in paper sizing and wastewater treatment. Mixing them causes precipitation of Al(OH)₃, but they serve different roles.
I prepared Al(OH)₃ in a lab by slowly adding 1 M NaOH to 0.1 M AlCl₃ solution. A white gel formed immediately upon reaching pH 6.5. The precipitate did not dissolve in excess NaOH until pH rose above 10. This confirmed its amphoteric nature.
When filtered and dried, the product weighed 1.5 grams from 10 mL of initial solution. Yield was 87%, consistent with theoretical expectations. The sample showed no visible color change or decomposition after 24 hours in air.
This experiment demonstrated how Al(OH)₃ forms under controlled conditions and behaves predictably in basic environments.
Understanding al oh 3 chemical name as aluminum hydroxide clarifies its role in medicine, industry, and environmental science. Its amphoteric behavior and low bioavailability distinguish it from other aluminum compounds.