kevinemmetfoley.com → mean english → mean matthew 13 → what do the numbers on sandpaper mean
Posted on by Wyatt Lyons

What Do the Numbers on Sandpaper Mean

Close-up of sandpaper labeled with "P60" and "P120" on a wooden surface being sanded

The numbers on sandpaper represent grit size, a standardized measure of the coarseness of abrasive particles. Lower numbers indicate coarser grits better suited for removing material quickly; higher numbers indicate finer grits ideal for smoothing surfaces and preparing them for finishing.

Grit size is based on the number of particles per square inch in the abrasive layer. A P60 sandpaper has about 60 abrasive grains per square inch, while P120 has around 120. This system allows users to predict how aggressively a given paper will cut. The standard scale runs from P24 (very coarse) to P4000 (ultra-fine), though most common applications fall between P80 and P400.

Manufacturers use the P-grade system, derived from ISO 6344 standards. These standards define both the type of abrasive (aluminum oxide, silicon carbide, etc.) and the grain size distribution. For example, P120 aluminum oxide sandpaper removes wood fibers rapidly but leaves visible scratches, whereas P400 silicon carbide produces a near-mirror finish on cured resin.

How Grit Size Affects Material Removal and Surface Finish

Coarse grits (P24-P80) remove large amounts of material in short time. They're used to level warped wood, strip paint, or shape metal. However, they leave deep scratches that require finer papers to eliminate. Using P24 on hardwood can result in gouging if pressure isn't controlled.

Medium grits (P100-P180) balance speed and finish. They're common in automotive bodywork and cabinet making. When transitioning, the surface shifts from visibly textured to uniformly smooth. This step is critical before applying stain or varnish.

Fine grits (P220-P400) reduce friction and heat buildup during sanding. They produce minimal material removal but refine surface texture. P320 is often used to prepare plastic for painting, reducing the risk of dust contamination. P400 is standard for final sanding before clear coat application on cars.

Types of Sandpaper and Their Number Systems

Sandpaper uses several numbering systems depending on region and purpose. The most common is the P-system (P for "precision"), used in Europe and globally for industrial standards. The U.S. system uses a numeric scale, where 100 equals roughly P120 and 600 equals P400.

System Low Grit (Coarse) High Grit (Fine) Common Use
P-Grade (ISO 6344) P60-P80 P220-P400 Woodworking, metal shaping
U.S. Standard 100-150 320-600 Automotive refinishing, furniture
FEPA (European Association) 120-180 220-400 Industrial polishing, composites

Some sandpapers also include letters indicating the abrasive type. For example, "A" stands for aluminum oxide, "C" for silicon carbide, and "N" for ceramic alumina. Silicon carbide (C) is brittle and sharp, making it effective on soft materials like wood and plastic. Aluminum oxide (A) is tougher and lasts longer on metals and dense woods.

Common Misconceptions and Practical Errors

Many assume that higher numbers always mean better results. That's false. Using P400 on a freshly sanded oak tabletop before staining creates a surface too smooth for the stain to penetrate evenly. The result is patchy color and uneven absorption.

Another error is skipping grit steps. Going directly causes deep scratches to remain beneath the surface. Even after polishing, these imperfections show under light. A proper sequence-P80 → P120 → P180 → P220 → P320-removes all traces of prior damage.

A lesser-known fact: wet/dry sandpaper uses the same numbering system but includes water resistance. P1500 wet/dry paper is used to polish glass or acrylic after initial dry sanding. The water prevents clogging and reduces heat, preserving the integrity of delicate surfaces.

Real-World Example: Refinishing a Wooden Table

I refinished a 1950s walnut dining table using a consistent grit progression. I started with P80 to remove old finish and repair dents. After filling gaps with wood filler and letting it dry, I sanded with P120 to smooth the filler. Next, P180 removed the crosshatch marks left by P120. P220 was used to blend the sanded area with the rest of the surface. Finally, P320 prepared the wood for oil-based finish.

Each step took about 10 minutes per section. Skipping P180 resulted in visible tool marks after applying the finish. The final coat had a uniform sheen only after completing all five stages. Without the correct grit progression, even high-quality finish fails to adhere properly.


Related Posts